The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample.

The AAF 11/3 & AAF 11/7 ashing furnaces provide a continuous flow of preheated air through the chamber, and are designed to comply with ISO 1171:2010, ASTM D3174-04: 2010 and ASTM D4422.

1100 ℃ maximum operating temperatures

PID301标准控制器，单段程序控制

Large floor area allows for large numbers of samples

适用于食品、塑料、煤料和其他碳氢化合物

Designed to comply with ISO 1171:2010, ASTM D3174-04:2010 and ASTM D4422

硬质氧化铝耐磨内衬避免加热元件受到化学侵蚀和机械冲击

4 sided heating (2 sides, roof & hearth)

Air inlet & tall chimney give airflow of 4 to 5 changes per minute

低烟囱保证气流最大程度接近样品，优化燃烧效率

采用大功率加热元件补偿高气流导致的热量损失

空气预热后进入炉膛，确保良好的温度均匀性

Sample tray and loading handle

AAF 11/7提供两相电

过温保护

A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications

内容可能会被修改或更正。

AAF 11/3

AAF 11/7

请注意：
- Holding power is measured at 500°C
- Heat up rate is measured to 100°C below max, using an empty chamber
- Maximum power and heat up times based on a 240V supply

内容可能会被修改或更正。