金牌会员第3
访问量: 6604328   网址: goodfellow.cnreagent.com    在线留言 
产品搜索
材料 >> 金属材料
铼,棒, Re, 6.35mm直径, 4N
铼,棒, Re, 6.35mm直径, 4N图片
品牌: Goodfellow
纯度含量: 99.99%
产地: 英国
索取资料及报价
品牌:Goodfellow
纯度含量:99.99%
产地:英国
产品介绍
订货号包装规格
Length (Round)
993-207-6610mm
514-895-4625mm
365-458-0150mm
311-179-5575mm
581-620-90100mm
682-711-21150mm
184-868-78200mm

产品参数

Diameter[直径]6.35mm
Length[长度]10mm - 200mm
Purity[纯度]99.99%
Typical Analysis(典型分析)
Al3 PPM
B1 PPM
Ca1 PPM
Co3 PPM
Cr3 PPM
Cu2 PPM
Fe45 PPM
K1 PPM
Mg1 PPM
Mn2 PPM
Mo30 PPM
Ni3 PPM
Ti2 PPM
W1 PPM
Zr2 PPM
Atomic Properties(原子属性)
Atomic number75
Atomic weight ( amu )186.20700
Crystal structureHexagonal Close Packed
Electronic structureXe4f¹⁴5d⁵6s²
Ionisation potential ( No./eV )1 / 7.87
Ionisation potential ( No./eV )2 / 16.6
Natural isotope distribution ( Mass No./% )187 / 62.6
Natural isotope distribution ( Mass No./% )185 / 37.4
Photo-electric work function ( eV )5.00
Thermal neutron absorption cross-section ( Barns )85.0000
Valences shown-1 ,1,2,3,4,5,6,7
Mechanical Properties(机械性能)
Bulk modulus ( GPa ) ( Hard )334.0
Bulk modulus ( GPa ) ( Soft )334.0
Hardness - Vickers ( kgf mm⁻² ) ( Hard )700
Hardness - Vickers ( kgf mm⁻² ) ( Soft )280
Material conditionSoft
Material conditionHard
Poisson's ratio ( Hard )0.260
Poisson's ratio ( Soft )0.260
Tensile modulus ( GPa ) ( Hard )466.00
Tensile modulus ( GPa ) ( Soft )466.00
Tensile strength ( MPa ) ( Hard )2225.00
Tensile strength ( MPa ) ( Soft )1125.00
Yield strength ( MPa ) ( Hard )2150.0
Yield strength ( MPa ) ( Soft )315.0
Electrical Properties(电气特性)
Electrical resistivity ( μOhmcm )18.7@20℃
Superconductivity critical temperature ( K )1.7000
Temperature coefficient ( K⁻¹ )0.00450 @0-100℃
Thermal Properties(热性能)
Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ )6.600 @0-100℃
Latent heat of evaporation ( J g⁻¹ )3824
Latent heat of fusion ( J g⁻¹ )179.90
Melting point ( C )3180.00
Specific heat ( J K⁻¹ kg⁻¹ )138.0 @25
Thermal conductivity ( W m⁻¹ K⁻¹ )48.00 @0-100℃
Physical Properties(物理性质)
Boiling point ( C )5627
Density ( g cm⁻³ )21.000 @20

其他参数

公差

直径≤10mm±10%
聚合物+20% / -10%
陶瓷+20% / -10%
>10mm±5%
陶瓷+20% / -10%
聚合物+20% / -10%
长度<100mm±1mm
≥100mm+5% / -1%
相关产品
我要咨询 关闭
  •      
  • 姓名* 
  • 电话* 
  • 单位* 
  • email 
  • 留言内容*
  • 验证码*  
  • 让更多商家关注