Maximum Lump Size[] | 25mm |
Purity[纯度] | 99.9% |
Weight[重量] | 25 g - 100 g |
Typical Analysis(典型分析) |
Ca | 50 PPM |
Cu | <1 PPM |
Fe | 30 PPM |
La | 400 PPM |
Lu | 100 PPM |
Mg | 3 PPM |
Si | 1 PPM |
Sn | 1 PPM |
Sr | 1 PPM |
Tm | 100 PPM |
Atomic Properties(原子属性) |
Atomic number | 70 |
Atomic weight ( amu ) | 173.04000 |
Crystal structure | Hexagonal Close Packed |
Electronic structure | Xe4f¹⁴6s² |
Ionisation potential ( No./eV ) | 3 / 25.2 |
Ionisation potential ( No./eV ) | 2 / 12.2 |
Ionisation potential ( No./eV ) | 1 / 6.25 |
Natural isotope distribution ( Mass No./% ) | 173 / 16.2 |
Natural isotope distribution ( Mass No./% ) | 174 / 31.7 |
Natural isotope distribution ( Mass No./% ) | 172 / 21.9 |
Natural isotope distribution ( Mass No./% ) | 168 / 0.1 |
Natural isotope distribution ( Mass No./% ) | 170 / 3.1 |
Natural isotope distribution ( Mass No./% ) | 171 / 14.3 |
Natural isotope distribution ( Mass No./% ) | 176 / 12.7 |
Thermal neutron absorption cross-section ( Barns ) | 37.0000 |
Valences shown | 2 ,3 |
Thermal Properties(热性能) |
Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ ) | 25.000 @0-100℃ |
Latent heat of evaporation ( J g⁻¹ ) | 921 |
Latent heat of fusion ( J g⁻¹ ) | 53.20 |
Melting point ( C ) | 819.00 |
Specific heat ( J K⁻¹ kg⁻¹ ) | 145.0 @25℃ |
Thermal conductivity ( W m⁻¹ K⁻¹ ) | 32.90 @0-100℃ |
Mechanical Properties(机械性能) |
Bulk modulus ( GPa ) ( Polycrystalline ) | 13.5 |
Hardness - Brinell ( Polycrystalline ) | 25 |
Material condition | Polycrystalline |
Poisson's ratio ( Polycrystalline ) | 0.280 |
Tensile modulus ( GPa ) ( Polycrystalline ) | 17.80 |
Tensile strength ( MPa ) ( Polycrystalline ) | 68.90 |
Yield strength ( MPa ) ( Polycrystalline ) | 65.5 |
Physical Properties(物理性质) |
Boiling point ( C ) | 1194 |
Density ( g cm⁻³ ) | 6.977 @20℃ |
Electrical Properties(电气特性) |
Electrical resistivity ( μOhmcm ) | 28@20℃ |
Temperature coefficient ( K⁻¹ ) | 0.00130 @0-100℃ |