产品及产能 | |
制品容积(ML)Max.Volume of product(ML) | 5-10 |
制品最大高度(MM)Max.Height of Product(MM) | 430 |
适合胚管壁厚(MM)Wall Thickness of Preform (MM) | 1~4 |
适合胚管最大高度(MM) Max. Height of Preform (MM) | 180 |
制品最大直径(MM)Max.Diameter of Product(MM) | Φ190 |
生产能力(瓶/小时)Production Capacity (PCS/HR) | 350~400 |
胚管加热装置 HEATING DEVICE |
胚管座数(个)Mo.of Preform Holder(PCS) | 58 |
适合胚管口内径(MM)Max.Neck Diameter of Preform | φ30~φ45 |
远红外线光管排列(支×区) Arrangement of Infra-Red Tubes(PCSxZONES) | 10×6 |
实际加热功率(KW) Average Power Consumption(KW) | 18-20 |
拉吹装置 STRETCH-BLOW DEVICE |
模具腔数No.of Mould Cavity | 1 |
模具标准厚度(MM) Standard Mould Thickness(MM) | 300±0.5 |
模具标准宽度(MM) Standard Mould Width(MM) | 240 |
开模最大行程MM) Max.Span Between Opening Moulds(MM) | 270 |
模腔标准间距Standard Span Between Mould Cavities(MM) | --- |
额定动作气压(Mpa) Working Air Pressure(Mpa) | 0.8~1 |
最大吹气气压(Mpa) Blowing Air Pressure(Mpa) | 3 |
要求空压机排气量(M3/MIN)(低压/高压)Volume of Low/High Pressure Air Compressor(M3/MIN) | 1.2/2 |
机台外型尺长×宽×高(MM)Dimensions(Length×Width×Height)(MM) | 3100×1350×2100 |
主机重量(KG)Weight | 3 |