| 化合物类别 | 材质 | 化合物CAS | 化合物名称 | 耐受性 |
| Other 其他 | polysulfone (PSF) 聚砜 | 57-13-6 | urea 尿素 | marginal resistance 耐受性一般 |
| Other 其他 | stainless steel 不锈钢 | 57-13-6 | urea 尿素 | marginal resistance 耐受性一般 |
| Other 其他 | acetal copolymer (Celcon) 共聚甲醛 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | acetal homopolymer (Delrin) 均聚甲醛 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | acrylic (plexiglass) 丙烯酸树脂 (有机玻璃) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | alumina (Al2O3) 氧化铝 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | aluminum7 铝合金 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | anodic coating7 氧化膜/阳极镀层 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | flexible polyvinyl chloride (PVC / Tygon) 柔性聚氯乙烯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | neoprene / polychloroprene 氯丁橡胶 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | nylon (6, 6/6) 尼龙 (锦纶) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | paint, water-based 水性涂料 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polycarbonate (PC) 聚碳酸酯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyetherimide (PEI / Ultem) 聚醚酰亚胺 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyethylene (LDPE) 低密度聚乙烯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyethylene (HDPE) 高密度聚乙烯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyethylene terephthalate (PET) 聚对苯二甲酸乙酯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyethylene terephthalate glycol (PETG / Ultra-Clear) 聚对苯二甲酸乙二醇酯 (超净管) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyethylene terephthalate polyester film (Mylar) 聚对苯二甲酸乙二醇酯的聚酯膜 (聚酯薄膜) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyphenylene oxide (PPO / Noryl) 聚苯醚 (改性聚苯醚) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyphenylene sulfide (PPS) 聚苯硫醚 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyphenylsulfone (PPSU / Radel) 聚苯砜 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polypropylene (PP) 聚丙烯 (丙纶) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polystyrene (PS) 聚苯乙烯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyurethane paint (PU / PUR) 聚氨酯涂层 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | polyvinyl chloride (PVC) 聚氯乙烯 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | silicone elastomer (RTV / Silastic) 有机硅弹性体 (硅橡胶) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | silicone rubber 硅橡胶 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | synthetic rubber (EPDM) 合成橡胶(三元乙丙橡胶) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | synthetic rubber (Viton) (Viton) 合成橡胶(氟化橡胶) (氟橡胶) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | teflon (PTFE / Rulon A) 聚四氟乙烯 (特氟隆) | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | titanium (Ti) 钛合金 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
| Other 其他 | nitrile rubber (Buna N) 丁腈橡胶 | 57-13-6 | urea 尿素 | unsatisfactory resistance 耐受性低 |
| Other 其他 | epoxy resin 环氧树脂 | 57-13-6 | urea 尿素 |  unknown【耐受性未知】Flammability hazard.Not recommended for use in any type of centrifuge because vapors may be exposure to electrical contacts.Depending on the centrifuge type,such exposure could occur either during normal centrifugation or under failure conditions. 可燃性危险。不推荐用于任何类型的离心机，因为挥发蒸汽可能接触到电触点。而根据离心机类型，在正常离心或离心失败的情况下都可能会发生此类风险。 |
| Other 其他 | epoxy resin/carbon composite 环氧树脂/碳纤维复合材料 | 57-13-6 | urea 尿素 | unknown【耐受性未知】 Flammability hazard.Not recommended for use in any type of centrifuge because vapors may be exposure to electrical contacts.Depending on the centrifuge type,such exposure could occur either during normal centrifugation or under failure conditions. 可燃性危险。不推荐用于任何类型的离心机，因为挥发蒸汽可能接触到电触点。而根据离心机类型，在正常离心或离心失败的情况下都可能会发生此类风险。 |
| Other 其他 | polyurethane liner (PU / PUR) 聚氨酯 | 57-13-6 | urea 尿素 | unknown【耐受性未知】 Flammability hazard.Not recommended for use in any type of centrifuge because vapors may be exposure to electrical contacts.Depending on the centrifuge type,such exposure could occur either during normal centrifugation or under failure conditions. 可燃性危险。不推荐用于任何类型的离心机，因为挥发蒸汽可能接触到电触点。而根据离心机类型，在正常离心或离心失败的情况下都可能会发生此类风险。 |
| Other 其他 | copolymer/polyallomer (PA) 聚丙烯和聚乙烯聚合物 | 57-13-6 | urea 尿素 | satisfactory resistance 耐受性高 |
m.cnreagent.com